Keep your screen bright enough to edit photos in daylight and tough enough to survive unexpected drops. Our Anti-Glare screen protector combines anti-reflective, anti-glare, and anti-fingerprint coatings into one optical layer, cutting reflectivity to 0.8% and staying clear under polarized sunglasses. Underneath is high-alumina glass just 0.33mm thin, reinforced at the edges where cracks actually start, while a vacuum-deposited coating repels oil so smudges wipe off in one swipe, even after thousands of them. Two per pack, with a drop-in alignment tray that gets it right the first time.
- Cuts Glare, Doesn't Add It – Most protectors add glare and cancel out your iPhone's own anti-reflective coating. Ours combines anti-glare and anti-reflective into one layer, dropping reflectivity to 0.8% so you can frame and edit in direct sun.
- Three Coatings, One Layer – Anti-reflective, anti-glare, and anti-fingerprint built into a single optical system instead of stacked on top of each other.
- No Rainbow Effect – Stays clean under polarized sunglasses, where most protectors throw a rainbow sheen across your screen.
- Strong Where It Breaks – Cracks start at the edge, not the middle. High-alumina glass just 0.33mm thin, reinforced exactly where the failures happen.
- Scratch Resistant – Survives a 10,000-cycle wear test with no visible scratches.
- Anti-Fingerprint That Lasts – A vacuum-deposited coating still repels oil after 5,000 wipe cycles, so smudges keep wiping off clean months in, not just out of the box.
- Foolproof Install – A drop-in alignment tray centers it and a dust sticker clears particles, so it goes on clean and bubble-free the first time.
- Two Per Pack, Backed For Life – Two protectors, two cleaning kits, one tray, and Moment's lifetime guarantee.
- Dimensions — iPhone 18 Pro: 146.42 × 68.15mm · iPhone 18 Pro Max: 159.68 × 74.09mm
- Thickness — 0.33mm
- Weight — iPhone 18 Pro: 13.8g / 0.49oz · iPhone 18 Pro Max: 15g / 0.53oz
- Glass — High-alumina
- Coating system — 3A: anti-reflective, anti-glare, and anti-fingerprint in one optical layer
- Anti-fingerprint — Vacuum-deposited, >115° water contact angle, >110° after 5,000 friction cycles
- Scratch resistance — 10,000-cycle wear test
- Reflectivity — 0.8%
- Light transmission — 90%
- Adhesive — 380AB optical glue
- Edge — 169° wide arc, case-friendly
- In the box — 2x screen protectors, 2x cleaning kits, 1x alignment tray
- Warranty — Lifetime Guarantee
